Townhouse Quilt

What I Learned From The Townhouse Quilt (Part 4)

Good Afternoon!  It has consistently been in the 20-40 range for the last week here in Washington and last night it snowed and stuck!  So with a beautiful snow day and some coffee here I am to finish up this four part series.


#16 – How people either love or hate machine embroidery.

As I started finishing up this project I ended up taking it with me to a couple of places to see what people had to say about my progress.  Eight out of ten would usually say they loved it, were really interested in how it was coming together, or that they wanted to try it if they had an embroidery machine of their own.  The other two would be traditionalists who would say it was pretty but they thought I was cheating because my machine was doing most of the work.  I am not really sure which side of the fence I stand, but I have had my own doubts about this craft as well.  All of which has been smothered with practice and gaining more knowledge and skills.


#17 – How to use sashing on a quilt as you go project.

As I talked about in Part 1 I am not great with reading directions.  So when I began this project I did not understand that I was supposed to leave half an inch around all sides of the fabric (not the batting).  This led me to an interesting predicament when it came time for me to decide on adding the sashing, the fabric between each block.  I decided that since my buildings were black I would use the coordinating fairy frost.  Each block had a quarter each seam around the edges that would be hidden underneath the sashing.  To keep the sashing from overpowering the quilt I cut one inch strips out of the fabric and began the assembly.  Once each piece of sashing was added the finished size amounted to half an inch and I did not need to add extra bating under the sashing pieces.  This made each square lay flat and beautiful.


#18 – How many needles I needed for this project.

If there is anything in my sewing room I am OCD about it is 1)That my needles get changed regularly 2)That my machine gets cleaned after every single project 3)That my thread is all tucked away in their correct places 4)That I can quickly reach all of my must haves for embroidery.  That being said when it came down to trial and error the final number of needles I used for this project totalled around 10-12.  I do not have a firm number because I would do other small projects in between my blocks.  One needle would usually stay nice and sharp for two whole blocks.  If I kept it longer I would be able to immediately tell from the sound it made when passing through the fabric.


#19 – How many bobbins I used

I used one bobbin per block which totalled 20 bobbins.  I can’t remember how much thread my bobbin will hold, but I did go through one and a half spools of bobbin thread.  So that is approximately 1,312 yards (1,199 metres) of thread.  That is a ton of thread….but it is so worth it.


#20 – How much I really loved this project

I don’t think I can say enough how much I loved this project.  It was challenging, fun, stressful, rewarding, and I have learned so much from this project I am anxious to begin my next journey.  Please see the finished project below.


Thank you so much for following me through this list and I really hope everyone can learn something from my experiences.

If you have landed on this post and would like to read the whole list please start with Part 1, Part 2, or Part 3

Happy Sewing, Crocheting, Embroidery, Quilting or whatever craft you enjoy!

Townhouse Quilt

What I Learned From the Townhouse Quilt (Part 3)

Hi Everyone!  I am sorry it has taken me a few days to update this list.  If you follow me on Instagram or Facebook you will see that I work as a teacher at Joann Fabrics.  I love my job, and this week has been preparing for our open house.  So….super busy and very little time to do much else when you go to work and come home really tired.

Enjoy the next 5 things!


#11 – How to Select Multiple Fabric Lines

I know I touched on this topic before in #8 about impulse buying collections.  In this case I am talking about the overall project.  I chose to use the Andover Hungry Catapillar Line as my bright colors and on any other project I probably would have used solid white Kona Cotton.  Instead I chose to use Michael Miller’s Fairy Frost White.  I personally have a true obsession with fairy frost.  It comes in over 60 different color varieties and I love almost every one of them.  I am not as fond of the Glitter variations because they are stiff, but the other is amazing to the touch and it gives my projects great dimension.  That being said I also used another designer, Hoffman, for my border fabric.  I have had a long love of Hoffman’s batiks for my quilting and their ombre collection is nothing other than wonderful.


#12 – How to Play With Background Fabric

I touched upon my background selection in #11 but I want to talk about it again.  I would have used solid white Kona Cotton as my background fabric but I was afraid that it would look odd when placed beside the vibrant Andover.  So I chose to use the brand new 2 yards of white fairy frost.  I am so happy with the out come.  The moral is really not to doubt your choices of fabric because intuition will always payoff.


#13 – Thread tension is magic

I own a Husqvarna Diamond Deluxe and the deluxe means it comes with a “deluxe tension system” which to me means it is supposed to automatically moderate the thread tension.  Which it does, but you still have to thread the machine correctly.  So halfway through my quilt I ended up with some really funky looking stitching and I totally freaked out.  I went into my viking dealer and she showed me a trick to make it work and how I really have to be careful when I thread my machine.  So I went home and wow it started working wonderfully.


#14 – I need to blog about my embroidery experiences

I am always on the hunt for new embroidery techniques to enhance my knowledge and I love trying new things.  Please be sure to follow me as I continue to try these beautiful designs and all the things I keep learning.


#15 – How far can I stretch 2 yards of fabric?

When I started this project with the white fairy frost I had 2 yards to start with.  I was not really sure, at the time, what its purpose was for (I bought it the week before I was to even think about this project) and I was not really sure how much I would need.

The verdict?

I only used 1 and 1/3 yards of the ferry frost.  I was able to get 5 blocks from a 12 inch strip sub cut into 8 inch blocks.  The rest?  It has actually been used in my various other applique projects.

Thanks for Reading!  Join me next time in Part 4!

If you found this post by mistake start over at Part 1 or Part 2 if you missed the previous ones, or continue reading in Part 4

Townhouse Quilt

20 Things I Learned from the Townhouse Quilt (Part 2)

Welcome back!  I decided it would be better to break up the posts in order to make them easier to read.  I personally get fidgety if I have to sit and read something for a long period of time so I hope you are ready to read the next 5 things I have learned.


#6 – How to not be afraid of my large hoops

With my first embroidery machine I could only embroider with a 4 inch by 4 inch hoop.  This hoop was small, but it did a great job for the year I used it.  In comparison the largest hoop I can embroider in at the moment is 14 inches long and 8 inches wide.  If we are comparing their sizes I could fit 7 of my original hoops into the largest one I can use now.  It will come as no surprise when I say I had to use my largest hoop for this project.  When I started it was VERY intimidating.  By the 6,7,8…blocks I was so comfortable I no longer had to think about if I was going to bump it and mess up the machine some how.


#7 – How to Multi-Task During Stitchout

I am rather anxious about new things, and even by the 7th block I still faced a certain amount of dread that I would sit down to begin my task and the machine wouldn’t work.  To quell the desire to sit in front of my machine for hours on end, singing out my lungs to Hillary Duff, I decided I could watch, sing, and crochet another baby blanket for a friend.  Each stitch out takes about an hour and a half.  All together I have spent a whole day with this quilt, and countless other hours with pandora and my yarn.

P.S. – For anyone who is like me and likes to crochet, but does not know where to begin with a baby blanket.  I suggest Bernat Baby Yarn and a size N needle.  I personally did not follow a pattern.  I created a chain 101 across and then half-double crocheted my way through 5 balls of yarn.  


#8 – How to know what fabric you like, and impulse buy it

My husband, Justin, will probably roll his eyes when he reads this number.  He really is wonderful and happily (begrudgingly) goes to fabric and quilt stores with me.  The day I bought the colors you are seeing in my quilt he sadly was not with me.  I walked into Quilted Strait (Port Gamble, WA) with my friend Nicole and I saw this beautiful display of colors by the front door.  The Hungry Caterpillar fabric line by Andover Fabrics is ultimate vibrant color wheel.  When I saw them I knew I would be taking a few of it’s solid fabrics home with me.  What I did not know was how soon I would be starting a project with them.  The moral of this lesson is: YOU NEVER KNOW WHEN YOU WILL REALLY NEED THAT FABRIC.  SO BUY IT!!


#9 – Why I buy cones of thread

As a quilter I learned a very important lesson about small spools of thread.  If you use the same color all the time for piecing, you will run out fast.  When I started going to The Quilted Rose, in San Diego, I discovered cones of thread.  These cones usually hold upwards of 3,000 yards of thread.  That is a lot of thread!  Nicole recently finished one of the cones after a solid year of piecing.  Knowing this, I bought a cone of thread (6000 yards wow!) before I began my townhouse blocks. I thought using the same color I would go through a lot of thread.  Boy did I.  I can’t accurately measure how much thead I used.  I did take a photo from two different view to display.  The darker thread is the one I used for the townhouse buildings.  The orange thread is a brand new cone.


#10 – Design’s Look Better In Person

At the end of block 10 I had two rows of buildings I could line up one next to the other.  When I started this project I did have some hesitation about my color choices and also the background.  I did not use a solid white, but instead opted for my new go-to Michael Miller’s White Fairy Frost.  The original design also had different colors.  It had red, orange, yellow, green, and blue.  I did not care for the red or orange so they became pink and purple.  What I learned and what I always tell my friends is you don’t have to like the design colors.  Colors can be changed and should be to personalize it.

I hope everyone enjoyed today’s post.  I hope to see you next time in Part 3!


If you somehow ended up here and have not read Part 1 I would love for you to!

If you would like to keep reading please visit Part 2